Need help choosing a size or window style? Call or WhatsApp before ordering.
VAN WINDOW FINISHING TRIM • BLACK U-CHANNEL
Small U-Channel Window Trim – RU-ET-06 – 4m
£15.00
Small black RU-ET-06 U-channel edge trim supplied in a 4m length for a clean finish around bonded van window apertures.
Measure the full aperture before ordering
A 4m length is suitable for many single-window installations, but larger apertures may require more. The 50m roll is designed for trade and repeat use.
Secure checkout • Delivery and collection options are confirmed at checkout.
Clean internal edge
Covers the exposed cut metal aperture.
Four profile sizes
Small, Medium, Large and Jumbo options.
Two supplied lengths
Choose a 4m length or a 50m trade roll.
Profile support
Send Vanlite a photo if you are unsure.
U-CHANNEL PRODUCT INFORMATION
Below you’ll find full information about this U-channel profile, including its size, product code, supplied length, intended use and fitting guidance.
Small U-channel trim for bonded van windows
This black rubber U-channel finishing trim is designed to cover the exposed cut metal edge around a bonded campervan or conversion window aperture. The RU-ET-06 profile gives the installation a neater, more professional finish.
Supplied length
4m length, suitable for many single-window installations. Measure the full aperture perimeter before ordering.
Profile specification
- Profile size: Small
- Manufacturer code: RU-ET-06
- 6.3mm outer width x 9.9mm height; 2.7mm internal width; 1.8mm wall
- Colour: black
Fitting note
Push the channel firmly over the clean cut edge before the bonded window is installed. This is a finishing and edge-protection trim; it does not replace the primer, adhesive or sealing system required to bond the glass.
Compare the four U-channel profiles
Use the technical drawing on the product and compare the dimensions below. Measure carefully before ordering; these figures describe the profile, not a guaranteed fit for every aperture.
RU-ET-06
Small
2.7mm
internal width
6.3mm
overall width
Profile height: 9.9mm
RU-ET-01
Medium
5.6mm
internal width
9.2mm
overall width
Profile height: 12.6mm
RU-ET-08
Large
8.5mm
internal width
13.1mm
overall width
Profile height: 14.2mm
RU-ET-03
Jumbo
14mm
internal width
18mm
overall width
Profile height: 14.8mm
4m single length
A convenient length for many single-window apertures. Always measure the complete perimeter before ordering.
- Easy to handle for one-off installations
- Available in all four profile sizes
- Supplied as one continuous 4m length
TRADE & WORKSHOP OPTION
50m trade roll
Designed for converters, repeat installations and keeping commonly used trim in workshop stock.
- Better suited to multiple installations
- Available in all four profile sizes
- Measure and cut each required run
How the U-channel is used
1. Finish the aperture
Deburr and prepare the cut metal edge so the trim can sit evenly.
2. Dry-fit the trim
Press the U-channel over the edge and work carefully around curves and corners.
3. Fit before bonding
Confirm the trim is secure and does not obstruct the glass before applying the bonding system.
Finishing trim only
U-channel covers and protects the exposed edge. It does not bond or seal the glass and does not replace automotive primer or adhesive.
U-channel questions
How much U-channel do I need?
Measure the complete perimeter of the window aperture. A 4m length is suitable for many single windows, but larger apertures may require more. The 50m roll is intended for multiple installations.
How do I choose Small, Medium, Large or Jumbo?
Compare your required profile with the technical drawing and dimensions shown on the product page. If you are unsure, send Vanlite a clear photo and measurements before ordering.
Does U-channel bond or seal the window?
No. It is finishing and edge-protection trim only. A suitable automotive glass primer and adhesive system is still required to install the bonded window.
When should I install the U-channel?
Dry-fit it to the prepared aperture before applying adhesive and fitting the glass. Confirm it sits securely and does not interfere with the window or bonding bead.
Need help choosing the right profile?
Send a clear photo of the cut edge, the vehicle and your measurements. Vanlite can help you compare the profile sizes before you order.
COMPLETE THE JOB
You may also need
Related products
-
Bluetti Accessories
Bluetti Hub D1
Original price was: £249.00.£200.00Current price is: £200.00. Add to basket -
Bluetti Power Station
Bluetti Premium 200 V2 | Powerstation
Price range: £999.00 through £1,298.00 Select options This product has multiple variants. The options may be chosen on the product page
